| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :23.60 USD
SILKO engine air filter , Iran
The Silko air filter is designed to remove dust, contaminants, and suspended particles from the airflow, optimizing engine performance. The filter element is made of high-density synthetic fibers capable of capturing particles as small as 5 microns. Standard negative pressure during operation ranges from 1.2 to 2.5 kPa. The filter body is made of heat- and impact-resistant plastic, withstanding temperatures from -30 to 90 °C. A durable rubber gasket ensures complete sealing and prevents dust ingress.
Internally, the filter includes a reinforced core and a metal mesh layer to prevent deformation and airflow blockage. The modular design allows quick replacement, minimizing engine downtime. Silko air filters are compatible with light vehicles, heavy vehicles, and industrial machinery according to international standards. Service life depends on environmental conditions, ranging from 8,000 to 12,000 km or 500 to 600 operating hours.You can order and buy SILKO engine air filter from Iran by contacting us through whatsaap and email.
WEBSITE: SILKO engine air filter Iran
SILKOH Iran engine air filter specification
• In the manufacturing of the engine air filter cartridge by SILKOH, the fibre packing density is engineered at approximately 450–500 g/m² grams per square metre of media weight. This basis‑weight ensures a compact structure where porosity is limited to about 65 %–70 % of total volume, delivering high particle‑capture efficiency while maintaining low flow resistance. The pleated micro‑fibre paper layers are compressed to a thickness of nearly 8 mm after assembly, so each filter element achieves an active filtration area of roughly 1.2 m² in standard format.
• The fibre‑matrix is calibrated to remove particles down to 3–5 µm with an initial pressure drop of 35–45 Pa at an air flow rate of 1.0 m³/min. Over the service interval the accumulated dust holding capacity reaches ~350 g/m² before differential pressure climbs above 250 Pa. The cartridge shell supports an operational temperature range from –40 °C to +120 °C and ensures no collapse under dynamic air‑flow pulses up to 5 kPa amplitude.
Machines Using SILKO Engine Air Filter in iran
The SILKO air filter is used in industrial diesel and gasoline engines. It is applied in heavy forklifts, 5–200 kW power generators, and industrial air compressors. It is also installed in construction machinery such as bulldozers, excavators, and concrete mixers to protect the engine and extend component life. Engine intake pressure should be 10–30 kPa for optimal filter performance. SILKO filter airflow capacity ranges from 150 to 500 m³/h. Easy installation and quick access reduce service time and maintenance.
Tips for Replacing and Maintaining SILKO Air Filter in iran
To optimize maintenance of the SILKO air filter, first check engine intake pressure and airflow. Replace the filter every 150–200 working hours or every 3–6 months. Before replacement, turn off the engine and release air system pressure. Clean the filter housing with a dry cloth or soft brush to prevent dust from entering the engine. Avoid water or strong chemical solvents, as they damage the filter material. Proper installation with standard seals prevents air leaks and optimizes engine performance. Regular maintenance can increase filter life and engine efficiency by up to 30%.
