HYDAC 160cc Diaphragm Accumulator , Iran

This accumulator has a nominal volume of 0.16 liters or 160 cubic centimeters. Its maximum allowable working pressure is typically up to 350 bar. The standard operating temperature range is from -10 to 80 degrees Celsius. The main body is made of carbon steel with an epoxy coating. The elastomer diaphragm is made of Nitrile Butadiene Rubber NBR. The fluid connection is usually threaded to G1/4 or M16x1.5 standards. This model is designed for hydraulic shock absorption and pressure pulsation damping. Its approximate weight is between 1.5 to 2 kilograms. The gas pre-charge to system pressure ratio is 0.9. This design prevents mixing of nitrogen gas and hydraulic fluid.

Its internal structure consists of a gas chamber and a fluid chamber. A diaphragm completely separates these two sections. This component is manufactured according to DIN EN 13871 standards. Its pulsation damping capacity varies based on system pressure. The shell can withstand hydrostatic test pressure. The body color is typically blue or grey. The pre-charge gas is dry and pure nitrogen. This model operates in systems with mineral oil and HFC hydraulic fluids. The internal shell coating is optimized for fluid compatibility. This accumulator requires periodic servicing and maintenance.You can order and buy HYDAC 160cc Diaphragm Accumulator from Iran by contacting us through whatsaap and email.
WEBSITE: HYDAC 160cc Diaphragm Accumulator Iran