• Tel
• 021-66723241
• | Cell
• 09121134158

INSERT

CBC turning inserts, short for Cubic Boron Carbide, are made from ultra-hard materials with a cubic crystal structure, offering a hardness of approximately 3000 to 3500 HV. These inserts are specifically designed for machining heat-resistant alloys, superalloys, and hardened steels with hardness above 60 HRC. Their exceptional wear resistance and thermal stability up to 1200°C make them ideal for dry and high-speed cutting. Standard thickness ranges from 3.18 to 6.35 mm, with relief angles between 7 and 11 degrees and nose radii from 0.2 to 1.2 mm.

CBC inserts are commonly produced in CNGA, DNGA, and SNGA geometries, optimized for effective chip breaking and vibration reduction. These inserts are typically uncoated due to the intrinsic chemical and thermal resistance of the base material. Mounting accuracy is within 0.01 mm, and their lifespan is 3 to 5 times greater than carbide inserts. In finishing operations of hardened steels or nickel-based alloys, they deliver excellent efficiency and surface quality.
Application : براده برداری
Size : 6-25
Machinery : تراش
WEBSITE: INSERT Iran