arya-boxel-co Our Motto:
Viewed : 130625
Select Language
ENGLISH | | PERSIAN
Viewed 130625
Price: To be negotiated
wire rope sling wire rope sling
Exporter, Wholesale, Manufacturer
Tehran-South
+989122003350
Price: Negotiate
  • Price :negotiated

wire rope sling , Iran

A wire rope sling is a flexible and durable lifting device. It consists of a steel wire rope loop with two end terminations. The cable is made from high-strength steel wires with galvanized or stainless coating. A common construction is 6 by 36 with an independent wire rope core. Standard diameters vary from 8 mm to 52 mm. The minimum material tensile strength is 1770 N/mm². End terminations are made using cold pressing or aluminum ferrules. This process creates a connection with at least 90% of the cables nominal strength.

Load capacity depends on diameter, construction type, and sling angle. For example, a 16 mm diameter sling has a vertical capacity of 10.5 tons. The design safety factor is a minimum of 5 to 1 per EN 13414 standard. The angle between sling legs must not exceed 60 degrees. Various types include single-part, double-part, and multi-leg slings. These slings resist sparking, direct heat, and cutting. Regular inspection for wear, kinks, and broken outer wires is mandatory. Service life is maintained through periodic cable lubrication.You can order and buy wire rope sling from Iran by contacting us through whatsaap and email.
WEBSITE: wire rope sling Iran

wire rope sling

Guide to Purchasing Wire Rope Slings

Purchasing wire rope slings requires evaluating technical specifications, working conditions, and safety standards. First, calculate the Working Load Limit WLL based on the maximum load and safety factor typically 5:1. The diameter and construction of the wire rope e.g., 6x36 or 6x19 must be compatible with the type of sheave and bending conditions. The steel material e.g., improved plow steel, stainless steel should be selected according to corrosive environments or high temperatures. The type of end termination compressed fittings, swaged, or socketed must have adequate strength and safety. The sling length should be precisely determined according to need, considering the load angle. Valid standard certifications such as ASME B30.9, EN 13414-1, or ISO 8792 are mandatory. Request periodic inspection records and the manufacturing date from the supplier. Finally, operator training for safe use is essential.

I N F O @ N A N O T E J A R A T . C O M | 0 9 1 2 5 0 3 0 0 7 1
Nanotejarat, Iranian industrial database

© Copyright 2026 - All rights reserved