Wire rope clip , Iran

A wire rope clip is a mechanical fastener for forming a loop at a cables end. It is typically forged from Grade 43 hot-dip galvanized steel. The materials tensile strength is at least 420 MPa. A complete clip set includes a U-bolt, a saddle, and two nuts. The U-bolt diameter must match the rope diameter. Standard practice requires at least three clips spaced 6 rope diameters apart. Nuts must be torqued to specification using the correct tool. The holding capacity of each clip depends on cable size and type.

After tightening, the U-bolt ends should protrude at least 1.5 threads past the nut. The load must be applied only to the ropes dead end, not the U-bolt. These fittings are not suitable for dynamic or shock loading. Periodic inspection for loose nuts and deformation is mandatory. High humidity can cause galvanic corrosion between components. Clips are sized according to rope diameter, typically ranging from 3 mm to 40 mm. They should never be used to splice two cable ends together. This is considered a temporary and non-primary connection.You can order and buy Wire rope clip from Iran by contacting us through whatsaap and email.
WEBSITE: Wire rope clip Iran