.jpg "Eyehook")
| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Eyehook , Iran
- Price :To negotiate
- order by whatsapp
The forged steel hook is manufactured from medium carbon steel, typically AISI 1040 or equivalent. The ultimate tensile strength of this steel ranges between 650 to 750 MPa. The hook undergoes a quench and temper heat treatment process. This process achieves a final hardness between 32 to 38 Rockwell C HRC. All hooks are subject to certified load testing. The proof load test is typically 150% of the working load limit. The ultimate failure test is performed at 300% to 350% of the nominal capacity. The design incorporates a minimum operational safety factor of 4 to 1. This factor is calculated based on the steels minimum yield strength.
The hook shape follows a circular geometry with a gradual curve in the stress-bearing area. The hook surface is coated via hot-dip galvanizing or zinc spraying. The coating thickness is between 60 to 80 microns for corrosion protection. Depending on the type, hooks may feature a safety latch. This latch prevents accidental disengagement of the rope or attachment. Standard capacities are available from 0.5 tons to 50 tons. The shank or mounting section diameter is precision-machined. Magnetic particle or ultrasonic inspection for internal defects is mandatory.You can order and buy Eyehook from Iran by contacting us through whatsaap and email.
WEBSITE: Eyehook Iran
Different Sizes of Industrial Hooks
Industrial hooks are manufactured in a wide range of sizes and capacities. Size is typically defined by the diameter of the bend throat and the hook opening. Common sizes range from small 0.25-ton capacity with a 20 mm opening to very large 100-ton capacity with a 200 mm opening. Load-bearing capacity depends on steel material, design, and grade such as Grade 80 or 100. Eye hooks are designed for direct bolt connection, while shank hooks are for use with chains or other fittings. Selecting the appropriate size should be based on the maximum expected load, safety factor typically 4:1 or 5:1, and connection type. A hook with a safety latch is mandatory to prevent rope or chain slippage. Always check for capacity markings and standards such as ASME B30.10 on the hook.
.jpg?width=200&height=200&cropratio=200:200&image=/admin/uploads/شگل_Shackle_بازرگانی ایمان_1_8_u533_e19f5d__th (1).jpg&url=/admin/uploads/شگل_Shackle_بازرگانی ایمان_1_8_u533_e19f5d__th (1).jpg "Shackle")
