• Tel
• 09127105945
• | Cell
• 09127105945

face turning tool holder

The face turning tool holder is a specialized tool designed for performing material removal on horizontal and face surfaces of metal parts, ensuring high accuracy and stability. This tool is typically made from hardened alloy steel with a hardness of 50 to 62 Rockwell C, and its overall length varies between 120 and 260 millimeters. The shank cross-section is usually square or rectangular, ranging from 16×16 to 32×32 millimeters to provide sufficient resistance against cutting forces. The rake angle in this holder is typically set between 3 and 6 degrees, and the insert locking mechanism is designed as a high-strength set screw or mechanical clamp.

In the design of the face turning holder, the length-to-cross-section ratio is selected to be less than 5:1 to reduce vibrations during operation. This tool can be manufactured according to ISO 5608 and ISO 10889 standards. The holder’s weight varies between 0.5 and 1.5 kilograms depending on dimensions. TiN or TiAlN coatings increase wear and heat resistance up to 800°C. When used with carbide inserts, this holder supports cutting speeds of up to 240 meters per minute.

WEBSITE: face turning tool holder Iran