| Exporter, Wholesale, Manufacturer | |
| Tehran_North |  |
| +989122003350 | |
- Price :negotiated
elevator , Iran
A hydraulic elevator operates based on force transmission through pressurized fluid using direct or indirect acting cylinders. The working pressure is typically adjusted between 25 and 60 bar. Power unit motor capacity ranges from 5 to 30 kilowatts. Nominal cabin speed is generally between 0.3 and 1 meter per second. Load capacity varies from 300 to 5000 kilograms with a minimum cylinder safety factor of 2.5. Cylinder diameter is selected between 80 and 200 millimeters depending on capacity. Cabin leveling accuracy is maintained within ±10 millimeters using proportional control valves.
The structural configuration includes a power unit, oil reservoir, gear or screw pump, and flow control valve assembly. The cylinder may be installed directly beneath the cabin or indirectly with a rope system. Travel height is usually limited to 20 meters for low rise buildings. Overall system efficiency ranges from 75 to 85 percent, with energy losses dissipated as heat during descent. Safety components include rupture valves, relief valves, and mechanical safety gear compliant with EN 81 standards. Operational noise level is typically below 65 decibels.You can order and buy elevator from Iran by contacting us through whatsaap and email.
WEBSITE: elevator Iran
Application of Hydraulic Elevators in Low Rise Buildings in iran
Hydraulic elevators are widely used in low rise buildings up to five floors due to simpler power systems and lower initial investment cost. The system uses a power unit with a 7.5 to 22 kilowatt motor and hydraulic pump generating pressure up to 40 bar. A direct or indirect cylinder moves the cabin at rated speeds between 0.63 and 1 meter per second. Eliminating the counterweight simplifies shaft structure design and reduces required headroom to less than 3.5 meters. Typical capacity ranges from 320 to 1000 kilograms, equivalent to 4 to 13 passengers. Smooth starting and stopping characteristics make them suitable for residential complexes, small healthcare centers, and low traffic office buildings. Energy consumption is higher during upward travel, yet remains economically justified for projects with up to 60 starts per hour. Compliance with EN 81-20 and installation of safety valves and parachute systems are mandatory.
