| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Concrete Pump Parts , Iran
Concrete pump spare parts consist of wear resistant mechanical and hydraulic components designed for operating pressures between 70 and 130 bar. The delivery cylinder is manufactured with an internal diameter of 180 to 230 millimeters and a chrome layer thickness of 0.2 to 0.3 millimeters. Wear plates and cutting rings are produced from high chromium alloy cast iron with hardness ranging from 58 to 64 HRC. The S valve is induction hardened to a depth of 3 to 6 millimeters. Delivery pipelines with diameters of 100 to 150 millimeters are selected with wear resistance above 250 Brinell. Couplings and clamps withstand impact pressures up to 1.3 times nominal pressure.
The hydraulic system includes a piston pump rated at 320 bar with volumetric efficiency above 85 percent. High pressure hoses are selected with a 4 to 1 safety factor and temperature resistance up to 80 degrees Celsius. Bushings and seals are manufactured from polyurethane or NBR rubber with hardness between 70 and 90 Shore A. Fatigue life of wear components varies from 600 to 2500 operating hours depending on concrete mix design. Quality control includes hydrostatic pressure testing, hardness measurement, and dimensional inspection with 0.01 millimeter accuracy. Stable system performance is ensured up to 20000 operating hours under proper maintenance.You can order and buy Concrete Pump Parts from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Pump Parts Iran
Tips to Increase the Service Life of Concrete Pump Parts in iran
Extending the service life of concrete pump components requires continuous monitoring of wear rate, pressure, and operating temperature within defined engineering limits. Hydraulic pressure must remain within the design range, and fluctuation should not exceed 5 percent. Hydraulic oil temperature should be stabilized between 40 and 60 degrees Celsius to minimize seal degradation. Wear plates and cutting rings become critical when thickness reduction reaches 20 percent of the original value. Complete pipeline cleaning after each working shift prevents hardened concrete buildup. Pins and bushings must be lubricated every 50 operating hours using standard grease. Periodic oil analysis every 1000 hours detects metallic particle contamination before failure occurs. Maintenance data logging and trend analysis can reduce repair costs by up to 18 percent.
