| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
Rotary Group , Iran
- Price :To negotiate
- order by whatsapp
The KMF/KPV rotary group is a combined axial piston pump and radial motor system with variable displacement. Its monoblock housing is cast from EN-GJS-600 ductile iron with 600 MPa tensile strength. The pump section KPV uses hardened 20MnCr5 steel with 7 axial pistons and a secondary pressure control system. The motor section KMF is designed from 16MnCr5 steel with 5 radial pistons and a high-pressure mechanism. An intelligent hydraulic control system manages both sections simultaneously with 40-millisecond response. This assembly withstands 300 bar continuous operating pressure and 350 bar peaks under ISO 3 class. The pumps nominal flow reaches 90 liters per minute at 1800 RPM. The motors output torque at 250 bar pressure equals 180 Newton-meters.
The control structure utilizes two independent proportional valves with CAN BUS interface and embedded pressure sensors. A shared cooling system includes a plate heat exchanger and independent lubrication circuits for each section. The combined output shaft is manufactured from nitrided 34CrNiMo6 steel with dual ISO 14 spline connections. The hydraulic oil operating temperature range for the entire system is defined between -25°C to +110°C. Generated noise level at full load and one-meter distance measures maximum 74 decibels. A dual-circuit filtration system rated at 15 microns with differential alarms per filter is installed. The design service life until first major overhaul under combined loading is 14,000 hours of continuous operation.You can order and buy Rotary Group from Iran by contacting us through whatsaap and email.
WEBSITE: Rotary Group Iran
Important Points in Purchasing and Pricing the KMF KPV Rotary Group
Selecting these models is primarily based on full compatibility with the main engine pump specifications. Exact matching of the Part Number with the manufacturers catalog is mandatory. Paying attention to the fluid type engine oil, ATF, or hydraulic and its viscosity range is critical. The quality of the bearings and sealing system determines the components service life. The price of the KMF KPV rotary group is typically in the mid to high range due to its complex design and high precision. Original units from reputable brands come with a warranty and technical test certificate. Strictly avoid purchasing products without proper documentation and unreliable packaging.
