| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
OIL PUMP , Iran
- Price :To negotiate
- order by whatsapp
The oil pump is a mechanical device used to transfer oil and viscous fluids from a reservoir to hydraulic systems, engines, or industrial equipment. Typical flow capacity ranges from 5 to 200 liters per minute, with operating pressure between 1 and 30 bar. Pump types include gear, vane, and piston, selected based on system flow and pressure requirements. The body is made of stainless steel or aluminum, providing high resistance to wear and corrosion. The drive shaft, supported by industrial bearings and mechanical seals, ensures leak-free operation and long service life.
Structurally, the oil pump consists of the main body, internal gears or vanes, drive shaft, bearings, and inlet oil filter. Inlet and outlet ports are typically standard sizes from 1/2 to 2 inches. The pump can be installed horizontally or vertically and connected to an electric or gasoline motor. Built-in filtering and oil ventilation prevent contamination and damage. Pump efficiency exceeds 85%, making it suitable for hydraulic systems, automotive applications, and oil transfer lines.You can order and buy OIL PUMP from Iran by contacting us through whatsaap and email.
WEBSITE: OIL PUMP Iran
Installation and Startup of Oil Pumps for Optimal Performance
For oil pump installation, the mounting surface must be flat, rigid, and vibration-free to maintain alignment. Pipe connections should be free of twists and leaks, and the suction path designed short and straight to avoid flow restriction or air entrainment. Before startup, fill the reservoir with the correct oil type and viscosity, and check inlet and outlet filters. During initial operation, run the pump at low speed and bleed the system to remove air and pressure imbalance. Monitoring pressure, temperature, and flow during the first 24 hours ensures stable performance and optimal pump lifespan.
