| Exporter, Wholesale, Manufacturer | |
| Tehran-West |  |
| +989122003350 | |
- Price :negotiated
Anodizing , Iran
The hard anodizing process uses a concentrated sulfuric acid electrolyte. Oxide layer thickness is controlled between 25 to 150 microns with ±5-micron tolerance. Surface hardness increases up to 500 HV on the Vickers scale. This layer provides wear resistance equivalent to hardened steel. Applied voltage ranges from 40 to 100 V DC at 2-4 A/dm² current density. Electrolyte bath temperature is maintained between -5 to +10°C. These conditions produce a uniform coating with under 2% porosity.
Post-anodizing, sealing is performed in a nickel acetate solution. This step enhances corrosion resistance against seawater and acids. The final coating can be combined with optical dyes electrocolor or PTFE. This combination creates permanent anti-friction and hydrophobic properties. The process is applicable to 2000, 6000, and 7000 series aluminum alloys. Quality control includes thickness measurement, salt spray testing, and metallographic analysis. These services are critical for aerospace, automotive, and medical components.You can order and buy Anodizing from Iran by contacting us through whatsaap and email.
WEBSITE: Anodizing Iran
Key Considerations for Purchasing and Pricing Anodizing Services
The price of anodizing services depends on surface area, coating thickness, and aluminum alloy type. The Hard Anodizing process with greater thickness incurs higher cost. Surface preparation like sandblasting or polishing affects the final price. Post-anodizing coloring organic or electrolytic colors adds separate costs. The dimensions and shape of the part determine if standard production lines can be used or if special setup is required. Order quantity and volume impact unit price due to economies of scale. Quality certifications such as ISO 9001, MIL-A-8625, or automotive standards increase cost but guarantee quality. On-time delivery and process traceability are factors in selecting a reputable contractor. Quality control testing thickness measurement, adhesion test, corrosion resistance should be included in the base cost.
