Price: To be negotiated

sepahan gas oil separator fuel filter

Exporter, Wholesale, Manufacturer
Tehran
+989122003350

Price: Negotiate

Price :negotiated

sepahan gas oil separator fuel filter , Iran

The Sepahan forklift diesel fuel water separator filter is made of polyester and cellulose fibers and can remove up to 99 percent of water from fuel. Standard operating pressure ranges from 2 to 5 bar, with an operating temperature between -20 and 120 degrees Celsius. Fuel flow capacity ranges from 50 to 100 liters per hour, with an initial pressure drop below 0.2 bar. The filter housing is made of stainless steel or durable plastic to withstand system shocks and vibrations. Silicone and nitrile seals prevent fuel leakage and increase system longevity.

Internally, the filter has a two-stage separation chamber the first stage removes particles larger than 10 microns, and the second efficiently separates water from fuel. Outlet connections use standard M18 or M22 threads and feature an internal bypass valve to prevent engine starvation under high contamination. A transparent water collection bowl allows easy monitoring and replacement. Service life is 500 to 1200 operating hours or 12 months, depending on environmental conditions. The product is manufactured according to ISO 4020 and SAE J905 standards.You can order and buy sepahan gas oil separator fuel filter from Iran by contacting us through whatsaap and email.
WEBSITE: sepahan gas oil separator fuel filter Iran

Difference Between Genuine and Non Genuine Sepahan Forklift Filters in iran

The genuine Sepahan forklift filter is engineered according to ISO 16890 standards with over 99 percent filtration efficiency for 10 micron particles. The media surface area in the genuine unit is typically 15 to 25 percent larger and delivers an initial pressure drop below 2 kilopascals. Its filter paper uses resin coating resistant to 120 degrees Celsius and 95 percent humidity. In contrast, non genuine filters usually provide 85 to 92 percent efficiency and pressure drop may rise to 3.5 kilopascals. Sealing quality is also measurably different, with air leakage up to 5 percent higher in non genuine types. These differences directly affect fuel consumption, engine wear, and may reduce operational lifespan by up to 20 percent.

Diesel Lift Truck Fuel Water Separator Filter Replacement Interval Sepahan in iran

The fuel water separator filter in Sepahan forklifts should be replaced every 300–500 operating hours or at most every 6 months. In dusty environments or with contaminated diesel, replacement every 200 hours is recommended. Before replacement, turn off the system and relieve fuel pressure. Regular inspection for water and debris preserves fuel pump and injector performance. Using an original and standard filter prevents engine damage and efficiency loss. After installing a new filter, bleeding the fuel system is essential for uniform diesel flow.

Other products