| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :4.10 USD
linde fork lift fuel filter , Iran
- Price :4.10 USD
- order by whatsapp
The Linde forklift diesel fuel filter is made of cellulose and polyester fibers capable of removing particles as small as 10 microns. Standard operating pressure ranges from 3 to 5 bar, with an operating temperature between -20 and 120 degrees Celsius. Fuel flow capacity ranges from 60 to 120 liters per hour, with initial pressure drop below 0.2 bar. The filter housing is made of aluminum or reinforced plastic to withstand dynamic fuel system pressures. Silicone and nitrile seals ensure resistance to diesel and petroleum products.
Internally, the filter features multi-layer filtration with an effective surface area exceeding 0.05 square meters. Inlet and outlet connections use standard M18 or M22 threads. An internal bypass valve prevents engine starvation under severe contamination. Easy installation and quick replacement are possible without specialized tools. Service life is 500 to 1000 operating hours or 12 months, depending on environmental conditions. The product is manufactured according to ISO 4020 and SAE J905 standards.You can order and buy linde fork lift fuel filter from Iran by contacting us through whatsaap and email.
WEBSITE: linde fork lift fuel filter Iran
Recommended Replacement Interval for Linde Forklift Diesel Fuel Filters in iran
Linde forklift diesel fuel filters are typically replaced every 500–800 working hours or every 12–18 months, depending on operating conditions and fuel quality. In dusty or heavy-use environments, replacement intervals should be shorter. Before replacing, turn off the fuel system and release line pressure. Inspect water and particle deposits in the primary filter every 100 working hours to extend fuel pump and engine life. Using genuine Linde filters and clean fuel reduces clogging and system failure, optimizing equipment lifespan.
Fuel Filter Contaminant Filtration Capability in Linde Forklifts in iran
The fuel filter for Linde forklifts is designed to remove suspended particles, sediments, and impurities down to 5 microns. Its filtration efficiency exceeds 98%, reducing deposits and preventing damage to the diesel pump and injectors. Contaminant capacity ranges from 200–300 grams depending on volume and operating conditions. The filter’s working pressure is typically 4–6 bar, and it can withstand temperatures up to 120°C. The filter media is made of high-density cellulose and synthetic fibers, extending engine and fuel system life. Periodic replacement after 500–1000 operating hours or 12 months is recommended to maintain filtration efficiency.
