Vibratory Lapping and Polishing Machine , Iran

Lapping abrasives are made from aluminum oxide or silicon carbide particles. These particles in 16 to 80 grit are bonded onto rigid fiberglass plates. The standard abrasive plate diameter is between 100 and 300 millimeters. Stone thickness varies from 10 to 25 millimeters. Epoxy adhesive resistant to water and chemicals is used for bonding. System motors are designed with high torque and 0.5 to 1.5 kW power. Motor speed is adjustable from 1400 to 2800 RPM. These machines control a removal depth of 0.1 to 3 millimeters.

The machine structure features a vibratory mechanism with 2 to 5 mm amplitude. The suspension system uses waterproof bearings with IP65 rating. The slurry tank for water and particles is made from 304 stainless steel. This tanks capacity ranges from 20 to 100 liters depending on the model. The slurry pump operates at a flow rate of 10 to 50 liters per minute. Continuous filtration removes particles larger than 50 microns. This system achieves surface finishes up to Ra 0.8 micrometers. Advanced machines feature PLC controllers for pressure and time adjustment.You can order and buy Vibratory Lapping and Polishing Machine from Iran by contacting us through whatsaap and email.
WEBSITE: Vibratory Lapping and Polishing Machine Iran