| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
Concrete Grinding and Polishing Machine , Iran
The concrete grinder utilizes a three-phase induction motor with 3 to 15 kW power. The disc rotation speed is adjustable from 150 to 650 RPM. It generates an operational surface pressure of 70 to 150 kg/cm². The integrated water system, with a 5 to 20 L/min flow rate, controls dust. The machines base plate is aluminum alloy, 30 to 60 cm in diameter. The total machine weight ranges from 120 to 250 kg. This tool is designed for concrete finishing with an effective 40 to 80 cm working width per pass.
Its structure features a sturdy steel frame, hydraulic suspension, and a control unit. The hydraulic system provides 80 to 200 bar of operational pressure. The grinding depth per pass is precisely adjustable from 1 to 10 mm. The diamond abrasive discs used have a 20% to 40% segment density. This machine achieves a final surface roughness of 0.2 to 5 microns. The leveling accuracy reaches ±0.5 mm over a 3-meter span. Its dust extraction system reduces PM10 particles below 0.1 mg/m³.You can order and buy Concrete Grinding and Polishing Machine from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Grinding and Polishing Machine Iran
Concrete Grinder Tool Holder Production Standards
The production standards for concrete grinder tool holders are defined based on durability and safety. The steel used must be grade CK45 or higher. The hardness of cutting parts should be between 50 and 55 Rockwell C. The diameter of cutting discs is standardized between 300 and 500 mm. The electric motor must have an IP54 protection standard. The nominal motor rotation speed is also 6500 RPM. Connections must be resistant to severe vibrations. Each device must pass a dynamic balance test with an accuracy of 0.1 gram per cm. The final packaging requires a drop test from a height of 90 cm.
