Concrete Cutting Diamond Blade , Iran

A concrete cutting blade utilizes metal-bonded abrasive segments with industrial diamond grit. Diamond concentration ranges from 30/40 to 40/50 mesh with an average density of 35 percent. These segments are laser-welded to a steel core with 350 MPa tensile strength. Standard diameters range from 100 mm to 1200 mm. Blade thickness varies from 2.5 mm to 4.0 mm with a tolerance of ±0.1 mm. The optimal peripheral cutting speed is 50 to 80 meters per second. This blade cuts concrete up to 60 MPa compressive strength, asphalt, and masonry. Its service life reaches 500 square meters in reinforced concrete cutting.

Its construction features a steel core, cutting segments, and cooling slots. The number of segments ranges from 6 to 36 depending on diameter and application. Segment height is typically 10 mm to allow for re-sharpening. The segment attack angle is set between 0 and 15 degrees positive. Laser-cut slots facilitate water flow up to 8 liters per minute. This design maintains the cutting zone temperature below 100 degrees Celsius. High-quality blades feature precise markings for installation and maximum RPM. These markings ensure safety and efficiency in heavy-duty operations.You can order and buy Concrete Cutting Diamond Blade from Iran by contacting us through whatsaap and email.
WEBSITE: Concrete Cutting Diamond Blade Iran