| Exporter, Wholesale, Manufacturer | |
| Tehran_North |  |
| +989122003350 | |
- Price :negotiated
sink , Iran
- Price :To negotiate
- order by whatsapp
The IS-1020 kitchen sink model is made of 304-grade stainless steel with 18% chromium and 8% nickel. The standard sheet thickness is 0.8 mm with a tolerance of +0.05/-0.02 mm. External dimensions are typically 1200 x 500 mm with a useful depth of 200 mm. The final product weight varies between 8 and 10 kg. The sink surface features a brushed or mirror bead-blasted finish with a surface roughness Ra below 0.5 microns. This process enhances scratch resistance.
The single-bowl structure includes a main basin and a secondary draining ledge. The standard faucet hole diameter is 35 mm and the sprayer hole is 45 mm. The nominal capacity of the main bowl is approximately 45 liters with an optimal drainage slope of 2%. The drain outlet is designed for a standard 90 mm pipe. Under-counter installation uses stainless steel mounting clips. A rubber sound and moisture-insulating pad is applied to the underside. This feature extends the products service life.You can order and buy sink from Iran by contacting us through whatsaap and email.
WEBSITE: sink Iran
How to Install and Replace a Kitchen Sink
First, shut off the drain pipes and faucet valves, and turn off the water supply. Use a wrench to loosen the mounting clips of the old sink. Gently lift and remove the sink from its place. Thoroughly clean and dry the countertop surface. Place the new sink in position and check its leveling. Seal the connection area with a special sealant sink adhesive. Tighten the mounting clips under the countertop. Install and check the connections of the new faucet and P-trap. Finally, test all connections for water leaks. For professional installation and to prevent damage, hiring a skilled installer is recommended.
