| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
Fix 2011 Antenna , Iran
- Price :To negotiate
- order by whatsapp
The fixed Model 2011 antenna is designed for full UHF band reception from 470-862 MHz. Its gain is optimized between 14 to 16 dBi. Standard input impedance is 75 ohms with an F-Type female connector. Voltage Standing Wave Ratio VSWR is maintained below 1.8 across the operational band. The main body is constructed from 6063 alloy aluminum with anti-corrosion powder epoxy coating. Overall antenna length is 180 cm with a reflector width of 120 cm. Active elements are made from 6 mm diameter silver-plated copper rods. This antenna can receive DVB-T digital signals with a minimum signal level of -100 dBm. Mechanical resilience is verified for wind speeds up to 130 km/h. The operational temperature range is -30 to +70 degrees Celsius.
The antenna structure is a Yagi-Uda type with 20 elements, including a reflector, driven dipole, and directors. Impedance matching is achieved with an integrated 1:1 balun transformer. Reflectors and directors are made from solid aluminum tubes with a 10 mm diameter. The two-axis mounting bracket is constructed from 2.5 mm thick cold-galvanized steel. This bracket allows elevation adjustment from 0 to 90 degrees and 360-degree azimuth rotation. The antenna optionally includes a built-in LNA with a 1.8 dB noise figure and 20 dB gain. Final antenna weight without the amplifier is 3.8 kg. It is supplied with 304 stainless steel clamps for fixed installation on masts or walls. The standard included cable is a 5-meter RG-6/U coaxial cable with 95% shielding.You can order and buy Fix 2011 Antenna from Iran by contacting us through whatsaap and email.
WEBSITE: Fix 2011 Antenna Iran
Installing a Fixed Antenna on Wall Mounts, Ground Poles, and Masts
Wall Mount: First, choose a suitable location on a solid concrete or brick wall. Using a drill and heavy-duty wall plugs, securely install an L-bracket or vertical mast. Mount the antenna on the bracket and tighten it with a U-clamp. Align the antenna towards the transmission tower.
Ground Pole: Prepare a concrete foundation with minimum dimensions of 50x50x50 cm. Place a galvanized steel pole rectangular tube into the concrete and secure it with anchor bolts. After the concrete cures, mount and level the antenna on the pole.
Mast Monopole or Tripod: Install the mast on a proper foundation with guy wires for stability. Secure the antenna to the mast bracket using stainless steel clamps. Cable routing should be fastened to the mast with plastic cable ties.
For all methods, proper cable connection, using a drip loop, and installing a lightning arrester are mandatory. After installation, perform an auto-scan for digital channels.
