| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
2500 Electronic Protector , Iran
- Price :To negotiate
- order by whatsapp
The Model 2500 electronic surge protector utilizes metal oxide varistors MOVs with a clamping voltage of 270V AC. It withstands a peak discharge current Ipeak of up to 25 kA for an 8/20 µs impulse wave. The system response time is less than 25 nanoseconds for overvoltage detection. The energy absorption capacity per phase is at least 550 joules. The residual clamping voltage during full discharge remains below 20 volts. The protector features an internal thermal fuse to disconnect the MOV after its end-of-life. It supports a continuous operating voltage of 220V AC at 50-60 Hz. The maximum short circuit withstand rating is 50 kA symmetrical. The devices operating temperature range is -40 to +85°C. Protection is typically achieved through a 4-stage design MOV, gas discharge tube, filter, and choke.
The device structure includes three protection channels: Line-Neutral, Line-Line, and Neutral-Ground. A secondary protection gas discharge tube GDT with a breakdown voltage of 350V is incorporated. A stabilizing L-C filter attenuates high-frequency noise EMI/RFI above 100 kHz by up to 40 dB. A series choke limits inrush currents to a maximum of 200 amperes. An LED status indicator provides visual confirmation of protection health. Connections are screw-type terminals with silver plating, accepting wires up to 35 mm² cross-section. The enclosure is made of UL94 V0 polycarbonate with 10-joule impact resistance. The standard device dimensions are approximately 150x80x40 mm. This protector complies with IEC 61643-11 and UL 1449 Edition 4 standards.You can order and buy 2500 Electronic Protector from Iran by contacting us through whatsaap and email.
WEBSITE: 2500 Electronic Protector Iran
Key Considerations When Purchasing an Electronic Protector
Purchasing an electronic protector requires attention to technical specifications, equipment type, and environmental conditions. First, the protectors rated voltage and current must be higher than the equipments consumption. The energy absorption rating Joule Rating for surge protectors should be at least 1000 joules for general use and above 4000 joules for sensitive equipment. The response time should be less than 1 nanosecond. The number and type of outlets with grounding, adequate spacing should match the number of devices. An EMI/RFI noise filter is essential for audio-visual and telecommunications equipment. Warranty and equipment damage insurance should be provided by a reputable company. A digital display showing voltage status and protector health is useful. Check for safety standards such as UL 1449, CE, or TÜV. Finally, reading user reviews and choosing well-known brands reduces purchasing risk.
Digital 2008 Electronic Protector