Interface cable tray , Iran

The cable tray coupler is made from hot-dip galvanized steel with a thickness of 1.5 to 3 mm. Its dimensions are precisely designed to match standard cable tray profiles. The couplers width equals the trays internal width plus 20 to 30 mm. The typical length of this connector varies between 150 and 300 mm. Mounting holes are spaced at 25 mm center-to-center per international standards. The galvanized coating has a minimum thickness of 70 microns. This coupler can withstand tensile forces up to 5 kilonewtons without deformation.

The coupler structure is shaped as a U-shaped cover or a two-piece split coupler. Installation uses Grade 8.8 steel bolts and nuts with anti-corrosion coating. The bolt installation torque typically ranges from 15 to 35 Newton-meters. These connectors provide an electrical resistance of less than 0.1 ohm at the joint. Advanced couplers feature spring washers to compensate for thermal expansion. This design prevents connection loosening during thermal cycles. Couplers are used for straight sections, elbows, and elevation changes in tray systems.You can order and buy Interface cable tray from Iran by contacting us through whatsaap and email.
WEBSITE: Interface cable tray Iran