| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
milling machines , Iran
A conventional milling machine is a manual knee type machine tool used for machining flat surfaces, slots, and gears with direct operator control. Main motor power typically ranges from 1.5 to 7.5 kilowatts with spindle torque up to 90 newton meters. Spindle speed varies between 70 and 4000 rpm with gear driven transmission. X axis travel ranges from 600 to 1200 millimeters and Y axis travel from 250 to 400 millimeters. Handwheel graduation accuracy is 0.02 millimeter with minimum scale reading of 0.01 millimeter. The spindle taper is commonly ISO40 or MT4 with radial runout below 0.01 millimeter.
The structure is manufactured from GG25 gray cast iron with stress relief treatment and hardness above 180 Brinell. Ground dovetail guideways allow clearance adjustment below 0.015 millimeter. Longitudinal and cross feeds may be manual or powered by 0.75 to 1.1 kilowatt motors. Automatic feed rate ranges from 25 to 900 millimeters per minute. Table load capacity is typically between 250 and 800 kilograms. Quality inspection includes spindle concentricity below 0.02 millimeter and surface finish capability down to 1.6 micrometers Ra.You can order and buy milling machines from Iran by contacting us through whatsaap and email.
WEBSITE: milling machines Iran
Safety Tips When Operating a Conventional Milling Machine in iran
Following safety precautions when operating a conventional milling machine prevents mechanical injuries and flying chip hazards. Wearing certified safety goggles and anti slip safety shoes is mandatory. The workpiece must be firmly clamped in a vise or fixture to prevent movement at speeds above 3000 rpm. Before starting the machine, cutter tightness and spindle alignment should be checked. Never place hands or measuring tools near the cutter while it is rotating. Spindle speed and feed rate must match the material type and tool diameter to avoid tool breakage. Chips should be removed only after the spindle comes to a complete stop. The emergency stop button must remain accessible and tested regularly.
