| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
concrete pump , Iran
A concrete pump is a continuous concrete conveying machine operating at 70 to 140 bar with flow rates of 40 to 200 cubic meters per hour. It features twin delivery cylinders with 180 to 230 mm inner diameter and 1400 to 2100 mm stroke length. The S valve system is manufactured from wear resistant alloy steel with 58 to 62 HRC hardness. Hydraulic unit power ranges from 110 to 300 kW and system pressure reaches 350 bar. Delivery pipeline diameter is typically 100 or 125 mm to maintain flow velocity below 3 m/s.
The chassis structure in truck mounted models is designed from S355 steel with a minimum safety factor of 2.0. Boom reach in placing models ranges from 28 to 63 meters with tip deflection below 1 percent of total length. Hopper capacity varies between 500 and 900 liters and includes an agitator rotating at 15 to 25 rpm. Service life of wear parts such as cutting ring and wear plate reaches 20000 cubic meters of concrete. All components undergo hydrostatic testing at 1.5 times nominal pressure and quality control according to ISO 9001.You can order and buy concrete pump from Iran by contacting us through whatsaap and email.
WEBSITE: concrete pump Iran
Difference Between Original and Aftermarket Concrete Pump Parts in iran
Original concrete pump parts are manufactured according to the official engineering drawings with dimensional tolerances below 0.1 millimeter, while aftermarket parts typically show higher deviations. In brands such as Putzmeister and Schwing wear components are controlled within 58 to 62 HRC hardness, whereas aftermarket versions often remain below 52 HRC. The alloy composition of genuine parts includes precise chromium and carbon percentages to meet DIN wear standards, while aftermarket parts usually lack certified material analysis. Service life of original components can be up to 30 percent longer. Genuine parts include traceable serial numbers and casting codes, while aftermarket parts often use generic packaging. From a life cycle engineering perspective, cost per cubic meter pumped is lower with original components.
