| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
SEALING RING dn 250 , Iran
- Price :To negotiate
- order by whatsapp
Stationary concrete pump spare parts include concrete delivery components, hydraulic systems, and wear resistant elements designed for heavy duty operation. Operating pressure typically ranges from 80 to 130 bar, with output capacity between 30 and 120 cubic meters per hour. Delivery cylinders are manufactured with internal diameters from 160 to 230 millimeters and strokes of 1200 to 2000 millimeters. Concrete pistons use polyurethane packings rated at 85 to 95 Shore A hardness for high wear resistance. Delivery pipes are produced from alloy steel with hardness between 56 and 65 HRC. Wear plates and cutting rings exceed 500 Brinell hardness to increase durability.
The mechanical structure is built on a steel chassis with minimum yield strength of 355 megapascals. The hopper includes an agitator rotating at 20 to 30 revolutions per minute to prevent concrete segregation. The S valve or rock valve operates at 15 to 35 cycles per minute for flow switching. A hydraulic piston pump rated between 75 and 180 kilowatts delivers 150 to 280 liters per minute. Machining tolerances for bushings and pins are maintained below 0.05 millimeters. Quality control includes pressure testing, leakage inspection, and precise dimensional verification of critical components.You can order and buy SEALING RING dn 250 from Iran by contacting us through whatsaap and email.
WEBSITE: SEALING RING dn 250 Iran
Importance of Using Genuine Parts in Pump Performance in iran
Using genuine parts in a concrete pump directly affects volumetric efficiency and system pressure stability. Original components are manufactured within strict factory tolerances, typically below 0.02 millimeters. This precision reduces internal leakage and can improve pumping efficiency by up to 12 percent per cycle. Standardized alloy composition and controlled heat treatment increase component service life by at least 25 to 40 percent. Non genuine parts often have lower surface hardness than the required HRC range and wear out faster. Genuine components reduce the risk of sudden failure, project downtime, and secondary repair costs. Full compatibility with the hydraulic system also prevents oil temperature rise and pressure loss.
