| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
| info@mtcotools.com | |
Sandvik turning inserts are made from tungsten carbide with an advanced TiAlN coating that provides thermal resistance up to 1000 degrees Celsius. Typical dimensions include a thickness of 4.76 mm, cutting edge length between 8 to 12.7 mm, and nose radius ranging from 0.4 to 1.2 mm, which play a crucial role in precise chip removal and extended tool life. The positive rake angle varies between 7 to 20 degrees, and the clearance angle is 6 to 7 degrees, helping to reduce cutting forces and prevent vibration. Sandvik inserts are available in geometric types such as TNMG, CNMG, and TCGT, each optimized for different materials like steel, stainless steel, and aluminum.
Under operating conditions, Sandvik turning inserts can withstand cutting speeds from 250 to 700 meters per minute and feed rates from 0.1 to 0.4 millimeters per revolution, depending on the workpiece material. The nano-layer coating technology and optimized insert geometry increase machining accuracy and reduce tool failure. Precise manufacturing standards compliant with ISO 9001 ensure quality and quick insert replacement in tool holders. Proper use of coolant can extend tool life up to 150 minutes under heavy machining conditions.
You can order and buy insert from Iran by contacting us through whatsaap and email.
WEBSITE: insert Iran
