| Exporter, Wholesale, Manufacturer | |
| Tehran |  |
| +989122003350 | |
- Price :negotiated
Kito 5 Ton Four-Way Electric Chain Hoist , Iran
- Price :To negotiate
- order by whatsapp
The Kito electric chain hoist has a nominal capacity of five tons. This four-way model performs lifting operations. Its drive system is powered by a three-phase electric motor. Motor power typically ranges between 4 to 7.5 kilowatts. Its standard lifting speed is approximately 8 meters per minute. The lifting chain is made of medium carbon alloy steel. This chain is tested under ISO 4301 and DIN 56922 standards. The chain diameter is typically 10 millimeters. It features a dual electromagnetic and mechanical braking system. This system secures the load in a suspended state. The design safety factor is usually over 1 to 6.
The hoist structure is built from steel with a minimum yield strength of 235 MPa. The main beam is fabricated as a welded box section. This beam includes a walkway platform for the motor support. The transverse mechanism utilizes steel wheels and rails. The controller is a pendant type with a five-meter cable. This controller manages the four primary movement directions. The motors electrical protection rating is typically IP54. The operating motor voltage is 380 volts at 50 Hertz frequency. This unit is equipped with an overload relay limiter. It also features an emergency stop system on all axes.You can order and buy Kito 5 Ton Four-Way Electric Chain Hoist from Iran by contacting us through whatsaap and email.
WEBSITE: Kito 5 Ton Four-Way Electric Chain Hoist Iran
Installation and Commissioning Guide for a 5-Ton Kito Electric Chain Hoist from Iran
The safe installation of a 5-ton Kito electric chain hoist requires strict adherence to technical procedures and standards. Prior to any work, verify the devices technical specifications from its nameplate, including the model such as ER2-050IS, safe working load capacity 5 tons or 5,000 kg, and input voltage typically 220/440V three-phase. Ensure the supporting ceiling structure or beam can handle the weight of the hoist plus the maximum operational load. Mounting the hoist onto a suitable beam or rail must be done using correct fittings while observing the required headroom clearance e.g., 36 inches or approximately 91 cm to prevent load contact with the ground. Electrical connection must be performed by a qualified industrial electrician according to standards, and the control pendant wiring with its safe voltage e.g., 24V AC must be checked. Post-installation, a mandatory test lift with a load equal to 125% of the nominal capacity must be conducted, alongside functional tests of all safety systems like the electromagnetic brake, upper/lower limit switches, and the friction overload clutch. Regular maintenance, including inspection of the nickel-plated load chain, lubrication system, and the load cycle counter, ensures reliable operation and long service life.
