DEMAG 500kg conical brake , Iran

The brake lining used in a Demag 0.5 ton hoist is engineered according to the mechanical requirements of 500 kilogram lifting systems and typically features an initial thickness of 4 to 6 millimeters with a friction coefficient between 0.35 and 0.45 to generate an estimated braking torque of 45 to 70 newton meters. The effective friction diameter in this capacity range is usually selected between 80 and 110 millimeters to maintain torque stability under FEM 2m duty conditions. The lining material is formulated from high temperature resin combined with industrial fibers capable of resisting thermal loads up to about 220 degrees Celsius to minimize performance drop during repeated stops. This lining must dissipate roughly 200 to 350 watts of heat and maintain uniform contact pressure to prevent localized wear and avoid sudden increases in the brake air gap during intensive operating cycles.
You can order and buy DEMAG 500kg conical brake from Iran by contacting us through whatsaap and email.
WEBSITE: DEMAG 500kg conical brake Iran