Flap Disc , Iran

Flap discs are constructed from flexible polyester fibers with a density of 800-1200 grams per square meter. Abrasive grains of aluminum oxide or silicon carbide, graded P36 to P120, are bonded onto these fibers. Standard diameters range from 100 to 230 mm with a thickness of 2 to 6 layers. The maximum permitted operating speed is 80 meters per second ~12,000 RPM for 125 mm. These discs are suitable for metal, paint, wood, and plastic. An optimal working angle of 15 to 30 degrees relative to the workpiece is recommended for best performance.

The multi-layer structure provides the flexibility needed to conform to contoured surfaces. The bonding adhesive is a phenolic resin with heat resistance up to 200°C. They can be used for semi-finishing operations achieving a surface roughness Ra between 1.6 and 6.3 micrometers. Their design minimizes deep scratching. For safe operation, mounting on a compatible interface pad with appropriate hardness typically Shore A 60-90 is essential. This pad increases vibration damping by up to 40% and improves operator control.You can order and buy Flap Disc from Iran by contacting us through whatsaap and email.
WEBSITE: Flap Disc Iran