Diamond Saw Blade Specifically for Aluminum , Iran

Diamond saw blades for aluminum are manufactured in 185 to 500 mm diameters. The steel core is made from low-carbon steel with precise heat treatment. Blade thickness ranges from 1.6 to 2.8 mm with a dimensional tolerance of ±0.05 mm. Industrial diamond particles of 80/100 mesh are set in the cutting segments. A soft and flexible bond matrix, such as bronze-tin, is selected. This bond prevents clogging and adhesion of soft aluminum chips. The recommended rotational speed is between 3000 to 5000 RPM. This blade is optimized for cutting extruded profiles up to 150 mm thick.

The blade structure features wide gullets for rapid chip removal. The gullet angle is designed at approximately 15 degrees. The number of diamond segments typically ranges from 24 to 64. Each segment height is between 5 to 8 millimeters. The blade surface is coated with nickel to reduce friction and dissipate heat. Blade runout TIR is maintained better than 0.1 millimeters. This blade can produce cuts with a smooth surface finish up to Ra 3.2 micrometers. Its service life before requiring re-sharpening reaches 2000 hours of continuous cutting.You can order and buy Diamond Saw Blade Specifically for Aluminum from Iran by contacting us through whatsaap and email.
WEBSITE: Diamond Saw Blade Specifically for Aluminum Iran