| Exporter, Wholesale, Manufacturer | |
| Tehran_North |  |
| +989122003350 | |
- Price :negotiated
sink , Iran
- Price :To negotiate
- order by whatsapp
The IS-2018 kitchen sink is constructed from 0.7mm thick Grade 430 stainless steel. This magnetic ferritic alloy contains 17% chromium. The sinks external dimensions are 780 by 400 mm with a height of 170 mm. Its useful basin depth is 160 mm with a nominal capacity of 26 liters. The products net weight is 6.3 kilograms. Its utilitarian design focuses on a deep rectangular single bowl. Its plain rim is optimized for top-mount over-counter installation. A standard 35mm diameter central faucet hole is pre-cut.
This model features an industrial brushed surface finish. This finish provides a matte appearance resistant to minor scratches. The basin slope towards the rear outlet is approximately 3.2 degrees. The drain outlet diameter is 50mm, suitable for common plumbing fittings. It may lack advanced acoustic coating on the back. Its installation typically relies on silicone adhesive and simple brackets. The product is designed for normal use within 10 to 95 degrees Celsius. The IS-2018 sink is an economical and functional solution for light-duty use.You can order and buy sink from Iran by contacting us through whatsaap and email.
WEBSITE: sink Iran
How to Choose a Sink Size According to Cabinet Dimensions
For a correct selection, first accurately measure the internal length and width of the cabinet under the countertop. A general rule is that the sinks width should be at least 5 cm less than the cabinets internal width to allow sufficient space for installation and support. For standard cabinets about 60 cm wide, single-bowl sinks measuring 45 to 55 cm are suitable. Wider cabinets 80 cm and above can accommodate double or triple-bowl sinks. Also, pay attention to the sinks depth. The standard depth is 18 to 22 cm deeper sinks 24 cm are more practical for washing larger dishes but reduce the under-sink space. Finally, coordinate the placement of faucets and auxiliary holes with your sink and cabinet design.
