hydraulic pump , Iran

A hydraulic pump is a converter of mechanical to hydraulic energy. Its output flow rate varies from 0.1 to 1000 liters per minute. Continuous working pressures up to 700 bar are achievable in axial piston models. The volumetric efficiency of these pumps under nominal conditions typically exceeds 95%. The shaft rotational speed ranges from 500 to 3000 revolutions per minute. The housing is made from ductile iron or anodized-coated aluminum. Internal component dimensional tolerances are maintained around ±0.002 mm. Noise level under full load usually remains below 75 decibels.

The pump structure differs based on gear, vane, or piston type designs. In axial piston types, the cylinder block is mounted at a 15 to 40-degree angle. The piston slippers are made from hardened steel with chromium or titanium nitride coating. The valve plates are constructed from tool steel with a surface smoothness of Ra 0.1 microns. Shaft sealing is achieved using silicon carbide mechanical seals. These pumps often feature integrated pressure and temperature sensors. Lubrication is provided by the pressurized hydraulic fluid itself. The designed service life typically exceeds 10,000 hours of continuous operation.You can order and buy hydraulic pump from Iran by contacting us through whatsaap and email.
WEBSITE: hydraulic pump Iran