
wire rope clips , Iran
The steel wire rope clip is a durable mechanical fitting used to secure and fasten wire ropes in lifting systems, cranes, steel structures, and industrial applications. Clip sizes typically match wire rope diameters from 6 mm to 40 mm, with load capacities ranging from 0.5 to 20 tons depending on size and steel grade. The body is made from carbon steel or alloy steel, and some models undergo heat treatment to enhance tensile strength and durability. The surface is protected with hot-dip galvanizing, zinc plating, or phosphating to resist corrosion, moisture, and environmental conditions.
Structurally, the steel wire rope clip consists of a saddle base, a threaded steel U-bolt, and two heavy-duty hex nuts that apply uniform clamping force to secure the wire rope. It is widely used for forming wire rope eyes, structural bracing, and medium-duty connections. Proper installation—including correct number of clips, standard spacing, and correct saddle orientation—is essential for safety. Steel wire rope clips are commonly manufactured according to DIN 741 and EN 13411-5 standards to ensure strength, safety, and reliable performance.You can order and buy wire rope clips from Iran by contacting us through whatsaap and email.
WEBSITE: wire rope clips Iran
Load Capacity of Steel Wire Rope Clips in iran
The load capacity of steel wire rope clips depends on rope diameter, clip construction type, and the number of installed clips. Standard steel clips, usually made of alloy steel or forged steel, are used for wire ropes ranging from 6 to 40 mm. Typically, a properly installed steel clip can retain about 70 to 80 percent of the wire rope’s tensile strength. To achieve safe working capacity, using at least 2 to 4 clips according to manufacturer tables is recommended. Correct tightening torque, proper installation direction, and a minimum safety factor of 5 are essential for load capacity and lifting safety.





