206 starter , Iran
- Price :To negotiate
- order by whatsapp
The Peugeot 206 starter is a series-wound DC electric motor. It features a nominal power of 1.4 kilowatts, equivalent to 1.9 horsepower. Its rated operating voltage is 12V DC with a starting current exceeding 200 Amps. Its no-load speed reaches 3000 revolutions per minute. The initial starting torque is a minimum of 10 Newton-meters. The starter incorporates a solenoid with an electromagnetic pull force of 50 Newtons. This solenoid engages the pinion gear with the engine flywheel.
This starter assembly utilizes four pairs of ceramic permanent magnets. Its commutator diameter is 32.5 mm with a surface tolerance of 0.01 mm. The carbon brushes are 12 mm long with an electrical resistance under 20 milliohms. The pinion-to-flywheel gear engagement ratio is 1 to 12.5. The starter operates reliably within an ambient temperature range of -20 to +80 degrees Celsius. Its design complies with the European durability testing standard ISO 8853. This component supports a minimum of 50,000 starting cycles.You can order and buy 206 starter from Iran by contacting us through whatsaap and email.
WEBSITE: 206 starter Iran
Troubleshooting and Replacing the Starter on a Peugeot 206
A faulty starter often manifests with a clicking sound or complete silence when turning the ignition key. Before any action, check the battery health and its connections. Ensuring the proper function of the starter relay is also crucial. For replacement, first disconnect the batterys negative terminal. Then, remove the starters electrical connections. Unscrew the bolts connecting the starter to the engine block. Carefully remove the faulty starter from its location. Position the new unit correctly in place. Tighten the bolts to the specified torque usually 25 to 30 Newton meters. Secure the electrical connections and reconnect the battery terminal. Finally, test the proper operation of the new starter.


