| Exporter, Wholesale, Manufacturer | |
| Tehran-South |  |
| +989122003350 | |
- Price :negotiated
pump , Iran
- Price :To negotiate
- order by whatsapp
The forklift hydraulic pump is an external gear type made from EN AC 46000 aluminum alloy. It features two gears with a 2.5 mm module and precision-machined AGMA 12 teeth. Its displacement capacity ranges from 10 to 50 cubic centimeters per revolution. Maximum continuous working pressure is 250 bar with a 320 bar peak pressure. Permissible rotational speed ranges from 900 to 2800 RPM. The pumps volumetric efficiency under rated conditions exceeds 93%. Hydraulic oil operating temperature must be between -40°C and +100°C. It is designed with a 14 mm keyed shaft.
The pump structure includes a housing with dual bronze-steel rolling element bearings. Shaft sealing is accomplished by dual graphite-ceramic mechanical seals. Maximum flow output is 75 liters per minute at 2400 RPM. Generated noise level is below 75 decibels measured at one meter distance. The pumps inlet and outlet ports have UNF 7/8-14 threaded connections. Total pump mass is approximately 5.5 kilograms for a 30 cc capacity unit. This pump couples directly to the forklifts internal combustion or electric motor.You can order and buy pump from Iran by contacting us through whatsaap and email.
WEBSITE: pump Iran
Signs of Hydraulic Pump Failure in Forklifts from iran
A noticeable reduction in fork movement speed or inability to reach full height are initial signs. Hearing abnormal noises like grinding or whining from the pump is alarming. Hydraulic oil leaks at pump connections or on its body are visible. Monitor for an abnormal increase in oil or hydraulic system temperature. Erratic or jerky operation of the forklift cylinders is also a key symptom. System pressure drop leads to reduced load-lifting capacity. Ultimately, increased engine fuel consumption occurs due to the pump working harder. Periodic inspection of these parameters prevents major failures.
