PUMP , Iran

Cartridge-style hydraulic pumps deliver flows from 5 to 100 liters per minute. Their continuous operating pressure reaches 250 bar with a 300 bar peak. The main flange is aluminum with hard anodizing the housing is epoxy-coated cast iron. The internal cartridge is an integrated unit containing gears, bearings, and seals. These pumps maintain over 92% volumetric efficiency under nominal conditions. Generated noise level at 150 bar is below 70 dBA. They are compatible with mineral, synthetic, and biodegradable oils with viscosities of 10 to 320 cSt. Permissible fluid operating temperature ranges from -20°C to +100°C.

The modular design allows for quick installation and cartridge replacement in under 15 minutes. The sealing system utilizes three elastomeric rings made of Viton and polyurethane. Specially coated rolling-element bearings offer a 10,000-hour life under rated load. The pump shaft is made from nitrided steel with a surface hardness of 70 HRC. Internal gear clearance is controlled to 0.01 mm to ensure minimal leakage. These pumps can operate at speeds ranging from 500 to 3000 RPM. A special inlet port design reduces the required NPSH to less than 0.5 meters. This feature prevents cavitation at high flow rates.You can order and buy PUMP from Iran by contacting us through whatsaap and email.
WEBSITE: PUMP Iran