| ,,Manufacturer,Wholesaler,Retailer | |
| Tehran |  |
| 021-22087856 | |
| |
| |
| blanc.gypsum@gmail.com | |
The Batis RG plain gypsum panel with a thickness of 9.5 mm is a prefabricated panel made of compressed gypsum with a paper facing, suitable for interior walls, false ceilings, and surface finishing. Its standard dimensions are 120×240 cm, and it weighs approximately 7.5 kg/m². The panel edges are designed with tongue-and-groove profiles to ensure seamless and robust connections. Special additives in the gypsum increase mechanical strength against cracking and pressure, providing a smooth surface suitable for painting and decorative applications.
The panel can be installed on metal or wooden frameworks, and its lightweight construction allows for faster installation and reduced use of traditional materials. Adequate pressure and load-bearing resistance, combined with compliance with national and European standards, make it suitable for residential, commercial, and office buildings. The Batis RG 9.5 mm gypsum board is an efficient and cost-effective solution for quick wall and ceiling finishing.
WEBSITE: Batis RG plain gypsum panel thickness of 9.5 mm Iran
When working with Batis RG gypsum boards with a thickness of 9.5 mm, following safety measures is essential for personal health and project quality. Use gloves, safety glasses, and dust masks to prevent direct contact with gypsum and inhalation of particles. Panels should be handled vertically or horizontally and lifted properly to reduce edge damage or breakage. Installation should use specialized screws and standard tools, and the lightweight panels help reduce stress on metal or wooden frameworks. After installation, the workspace should be cleaned of dust, and panels must be protected from water and moisture to ensure durability and surface quality.
