| ,Importer,,Wholesaler,Retailer | |
| Tehran |  |
| 09196218230 | |
| |
| |
| baygan.sanat@gmail.com | |
The KSB IXO-N submersible pump is a vertical multistage centrifugal unit designed for small wells, domestic water supply and pressure boosting systems. Its body and shaft are made from AISI 304 or 316 stainless steel, providing high resistance to corrosion and scaling. The pump has a nominal discharge diameter of 3 to 4 inches and can deliver flows from 1.5 to 15 m³/h and heads ranging from 20 to 100 meters, depending on model and stage configuration. Impellers are made of Noryl or stainless steel, ensuring high hydraulic efficiency. A silicon carbide mechanical seal guarantees leak-free operation under variable pressures.
The IXO-N series is compatible with IP68 submersible motors ranging from 0.75 to 4 kW. Water-lubricated bearings reduce friction and vibration, providing quiet and stable operation. Its slim and lightweight design allows easy installation in narrow boreholes. This pump is suitable for domestic water supply, villas, gardens, municipal pressure boosting, and storage tanks. Stainless steel construction, corrosion resistance and modular design ensure long service life and simplified maintenance.
WEBSITE: KSB IXO-N submersible pump Iran
Before installing and commissioning the KSB Ixo N submersible pump, shut off and fully release system flow and pressure. The installation depth should follow the technical specifications, ensuring sufficient clearance from the well bottom for proper water circulation to prevent cavitation. The pump must be installed vertically with a standard waterproof cable, and flanges or welded connections should be properly aligned and secured. Prior to operation, inspect the shaft and impeller, and activate motor protection systems including overload, dry-run, and voltage fluctuation safeguards. Upon commissioning, verify initial flow and discharge pressure and properly adjust the control panel to ensure stable operation and long service life.
