| ,Importer,,Wholesaler,Retailer | |
| Tehran |  |
| 09196218230 | |
| |
| |
| baygan.sanat@gmail.com | |
The KSB Amacan S submersible axial flow pump features a stainless steel AISI 304 housing and is engineered for very high flow applications. It is available in power ratings from 5.5 to 45 kilowatts and operates on a 400 volt supply. The nominal flow rate ranges from 300 to 2500 cubic meters per hour, with an effective head of 3 to 12 meters. The discharge duct diameter varies from 300 to 800 millimeters, and the axial flow impeller with hydrodynamic profiling minimizes system pressure losses. The integrated motor housing reduces dynamic vibration by up to 30 percent compared to conventional units, making it ideal for large pumping channels.
Paragraph 2 English:
The KSB Amacan S pump is rated IP68 and supports continuous full submersion operation. Allowable fluid temperature ranges from 0 to 40 degrees Celsius, and the dual silicon carbide mechanical seals enhance long term durability. The impeller speed ranges from 960 to 1450 revolutions per minute, and hydraulic efficiency falls between 70 and 82 percent. Depending on size, the unit weight ranges from 150 to 480 kilograms, while the soft start system reduces inrush current by up to 40 percent. The pump complies with EN ISO 9906 standards and is suitable for municipal wastewater stations and low pressure transfer pipelines.
WEBSITE: KSB Amacan S submersible axial flow pump Iran
Installing and commissioning the KSB Amacan S submersible pump requires adherence to technical procedures to ensure stable operation in industrial environments. Before installation, the well dimensions, immersion depth, and required flow rate must match the pump specifications, including nominal diameter, motor power, and hydraulic efficiency. The installation pedestal and guide column must be fully aligned and vibration-free to prevent bearing damage. When lowering the pump into the shaft, guide rails must be used, and descent speed should be controlled to avoid impact. Electrical connections must be sealed using a waterproof terminal box compliant with IP68. After commissioning, power consumption, discharge pressure, and flow rate should be measured and compared with rated values. An initial 10–15 minute test run is recommended to verify the absence of vibration, cavitation, and impeller malfunction.
